The Sixty Special was very distinctive and rich-looking this year. Broad ribbed stainless steel fairings decorated the entire rear quarter panel, below the conical flare. Even the fender skirts featured this type of trim, which extended fully forward along the body sills. Sixty Special scripts appeared on the sides of the tailfins and a Fleetwood script nameplate adorned the rear deck lid. Standard equipment included Hydra-Matic, power brakes, power steering, power windows, and fore-and-aft power front seat.
| Model Number | Body Style | Doors | Model | Seats | Price | Shipping Weight | Production Total |
|---|---|---|---|---|---|---|---|
| SERIES SIXTY SPECIAL FLEETWOOD | |||||||
| 58M-60 | 6039X | 4-door | Hardtop Sedan
| 6 | 6232 | 4930 | 12,900 |
| SERIES 75 FLEETWOOD | |||||||
| 58R-75 | 7523X | 4-door | Sedan
| 9 | 8460 | 5360 | 802 |
| 58S-75 | 4533X | 4-door | Imperial Sedan
| 9 | 8675 | 5475 | 730 |
| 58-86 | 8680S | - | Commercial chassis | - | - | - | 1,915 |
NOTE: The commercial chassis features a 156 inch wheelbase and was provided to professional car makers for construction of funeral cars and ambulances, etc.
| Type | V-8 Overhead valves |
| Block | Cast iron block |
| Displacement | 365 cubic inches. |
| Bore and stroke | 4.00 x 3.625 inches |
| Compression ratio | 10.25:1 |
| Brake horsepower | 310 at 4800 rpm |
| Bearings | Five main bearings |
| Valve Lifters | Hydraulic valve lifters |
| Carburetor | Carter AFB four-barrel Model 2862S. |
The limousine or nine-passenger long-wheelbase sedans were available once again, both with auxiliary seats and the same basic side trim as Series 62 models.
| Type | V-8 Overhead valves |
| Block | Cast iron block |
| Displacement | 365 cubic inches. |
| Bore and stroke | 4.00 x 3.625 inches |
| Compression ratio | 10.25:1 |
| Brake horsepower | 310 at 4800 rpm |
| Bearings | Five main bearings |
| Valve Lifters | Hydraulic valve lifters |
| Carburetor | Carter AFB four-barrel Model 2862S. |
| Model | Wheelbase | Overall Length | Front Tread | Rear Tread | Tires |
|---|---|---|---|---|---|
| Series 60S 58M | 133" | 225.3" | 61" | 61" | 8.00 x 15 blackwall |
| Series 75 58R & 58S (Fleetwood | 149.7" | 237.1" | 61" | 61" | 8.20 x 15 six-ply blackwall |
| Serial numbers now used a three symbol prefix. |
| The first pair of numerical symbols "58" designated model year. |
| A one-letter alphabetical code (included as part of model number in charts below) indicated model and series. |
| Each prefix was followed by the consecutive unit number which started at 000001 and up. |
| The serial number was located at the front of the lefthand frame side bar. |
| Motor serial numbers again matched and were found on the center lefthand side of the block above the oil pan. |
 |
 |
 |
 |
 |
 |
|---|