Do you have a dent in your car that’s ruining the entire look of it?
Regardless of whether your car was dented by hail, an errant shopping cart, or another car, you can get the dent out for good by taking the right steps. You can learn how to get a dent out of a car once and for all and restore the look of it.
That being said, getting a dent out of a car isn’t always easy. You might have to try one or more methods to do it.
There is also a chance that DIY dent removal might not be an option for you. If you have a really bad dent in your vehicle, you might need to call on professionals for help.
But you should see what you can do on your own before paying someone else to remove a dent for you. Here are some of the most effective ways to get a dent out of a car.
Attempt to Use a Plunger to Remove a Dent From Your Car
Just about everyone has at least one plunger lying around somewhere inside their home. They turn to it early and often when one of the toilets in their home backs up.
What they don’t always realize, though, is that plungers can also be used to remove dents from a car. They’re very effective when it comes to dents that are on the smaller side.
Here is how to get a dent out of a car with a plunger:
- Pour a little bit of water over both the dent in your car and the plunger
- Stick the plunger on top of the dent and push and pull it several times to see if the dent will budge
- Repeat this process if you’re unable to remove the dent from your car at first
This method won’t work on all dents. But it won’t hurt to give it a try when you consider how easy it is to use a plunger on your car.
See If Boiling Water Will Get a Dent Out of Your Car
If you have a dent in your car’s bumper, you might think that it would be simple enough to pop it back out. You can reach behind your bumper and try to push the part of it that’s dented out to fix it.
But what you’re often going to find is that it’s almost impossible to push a dent out of a bumper. That’s because the plastic used to construct most bumpers today is too hard for you to move it.
You can get around this by using a pot of boiling water. Simply pour the water over the dent in your car to loosen up the plastic just a little. This should provide you with the wiggle room you need to fix the dent in your car without the help of professionals.
Utilize a Hairdryer and a Can of Compressed Air to Eliminate a Dent From Your Car
The boiling water method that we just talked about is great for those dealing with dents in their car’s bumper. But what should you do if you have a dent in a part of your car that you can’t reach behind to pop the dent out?
In this case, you should try another method that will call for you to use a hairdryer and a can of compressed air to get the job done. Here are the steps you’ll want to take:
- Turn your hairdryer up to its highest setting and aim it at the dent in your car for several minutes until it starts to soften
- Shut your hairdryer off and spray the dent in your car with a can of compressed air
- Cross your fingers and hope that the cold air from the compressed air causes the dent to pop out
Heating and then cooling the plastic from your car should result in your dent popping out so that your car looks great again. You’ll be surprised to see how well this method works on most dents.
Try Using Dry Ice to Erase a Dent From Your Car
Most people don’t have dry ice sitting around in their home. But if you’re somehow able to secure a container of it or make it yourself, it can work wonders on car dents.
All you’ll need to do to put dry ice to good use is pick it up while wearing a pair of protective gloves and rub it around on the dent in your car. The dry ice should pull the dent out and make it a thing of the past.
Let the Pros Work Their Magic and Do Away With a Dent in Your Car
If you try all of the other methods that we’ve mentioned thus far and come up empty as far as removing a dent from your car goes, it’ll be time to call in the pros for assistance. They can find the right solution for eliminating a dent from your car.
StormWise automotive hail repair is designed to help you make dents caused by hail go away in no time. Even if you have a bunch of dents spread out all over your car after getting caught out in a hailstorm, they’ll disappear once the pros get their hands on your car.
Learning How to Get a Dent Out of a Car Can Save You Money
As we just alluded to a moment ago, there are going to be times when you’ll need to trust the pros to get a dent out of your car. There are some dents that aren’t going to respond at all to DIY dent removal.
But there are also lots of ways in which you can remove dents from your car yourself. And by learning how to get a dent out of a car, you can save a nice chunk of change in the end.
Give the methods that we’ve talked about here a try and see how dents respond to them. You could very well fix a dent yourself and not have to worry about calling someone else to help you with it.
Take a look at our blog for more DIY car repair tips and tricks.