1947 Cadillac
Two-inch wider doors were again seen on the Series 60 Special Fleetwood line, giving this car a custom look, as compared to standard Series 62 sedans based on the same GM C-Body shell. A heavy upper beltline molding, individual window loop moldings, and four slanting louvers on the rear roof pillar were identification features as was the new Fleetwood trunk ornament, which varied from that seen on lower models. Bright metal stone guards were adopted this season and skirted rear fenders were used again.
| Motor serial numbers 6420001 to 6428500 appeared on 1947 series 60S models. |
| Model Number | Body Style | Doors | Model | Seating | Factory Price | Shipping Weight | Production Total |
|---|---|---|---|---|---|---|---|
| 47-60 | 6069 | 4-door | Sedan | 6 | 3195 | 4370 | 8,500 |
| Type | V-8 L-head. |
| Block | Cast iron block. |
| Displacement | 346 cubic inches. |
| Bore and stroke | 3-1/2 x 4-1/2 inches. |
| Compression ratio | 7.25:1. |
| Brake horsepower | 150 at 3400 rpm |
| Bearings | Three main bearings. |
| Valve lifters | Hydraulic valve lifters. |
| Carburetor | Carter WCD two-barrel (models 595S or 595SA) or Stromberg AAV-26 two-barrel (models 380154 or 380871). |
 |
 |
 |
 |
 |
 |
|---|